Total : 0

A touch kit includes controller, cable and driver software. The controller communicates with the PC system directly through USB, RS232 or PS2 connector.

You can see how superior the design is with sensitivity, accuracy and friendly operation. The touch panel utility (driver software) supports the newest windows operation, and provides an easy and smooth interface for users.

Resistive Touch Panel Controller (4 / 5 / 8 wire)

Power Requirements DC+5V (max. 100mA, typical 70mA, 50mV peak to peak max ripple)
Operating Temperature -25 to 85 ℃
Storage Temperature -55 to 150 ℃
Relative Humidity 95% at 60 ℃
Interface
  1. RS232: 9600 bauds, None parity, 8 data bits, 1 stop bit
  2. USB: Full speed (12Mbps)
  3. PS2: PS/2 mouse
Resolution 2048 x 2048
Accuracy Tolerance Max. +/- 0.5% tolerance
Report Rate
  1. RS232: Max. 160 points/sec
  2. USB: Max. 200 points/sec
  3. PS2: Max. 140 points/sec
Response Time Max. 20 ms
Regulatory Approvals FCC-B, CE
Panel Resistance 4w:200~900Ω(pin to pin on the same layer)
5w: 50~200Ω(pin to pin on the same layer, touch resistance under 3kΩ)
Green Product RoHS Compliance
Note When both USB & RS232 ports are connected to a PC, only the USB port will be enabled.

Capacitive Touch Panel Controller

Power Requirements DC +5V, External power, 5~12VDC unregulated power (max. 65mA, typical 55mA, 50mV peak to peak max ripple)
Operating Temperature -40 to 85℃
Storage Temperature -40 to 90℃
Relative Humidity 95% at 60℃
Interface Auto - detection:
  1. RS232: 9600 bauds, None parity, 8 data bits, 1 stop bit.
  2. USB: USB 2.0 compliant, full speed
Resolution 2048 x 2048
Accuracy Tolerance Max. +/- 1%
Report Rate Max.180 points/sec
Response Time Max. 25 ms
Regulatory Approvals FCC-B, CE
Green Product RoHS
Pin Out Definition UL, UR, COM, LR, LL
ESD ± 27 KV Air, ± 8 KV Contact